Ozone Cannon

Bad Odour Eliminators

Suitable for eventual shock treatments, eliminating unpleasant odours.

Technical specifications

Why trust us?

🌍 Present in 27 countries

🛠️ Own production

✅ Full customisation

Ask for an estimate without obligation!

    Description

    It is the best system to prolong the life of fresh food in commercial surfaces and to eradicate definitively the problem of bad smells, including odours such as tobacco. It is obtained by provoking an electrical discharge and destroys bad smells by oxidation, leaving a fresh and pleasant atmosphere.

    It has a coverage area of up to 2500m2. It is portable, making it ideal for carrying on cleaning trolleys. With professional features to work under the most extreme conditions.

    Additional Information

    Dimensions

    24 x 17.5 x 19.5cm / 6. 88 x 9. 44 x 7. 67 inch.

    Net weight

    2800g.

    Gross weight

    3000g.

    Material

    Aisi 304 stainless steel.

    Colour

    Stainless steel.

    Ozone

    500mg/hour.

    Air flow rate

    175m3/hour.

    Tension

    110 V - 220 V -50/60 Hz.

    Consumption

    0.53 Amp.

    Electric current

    6.6A - 2.9A.

    Installation

    1. Position the appliance so that it is at an optimum height for its function. Do not place the appliance near water points or bottled liquids, respect a minimum distance of 3m.

    2. Before putting the appliance into operation, check that the internal parts and any electrical components are not wet or damp. Remove all metal parts that are resting on the appliance.

    3. Do not install in places where the temperature is between -5°C and +50°C, check that the humidity is not higher than 85%.

    Instructions for use

    1. Close windows and doors in the room to be treated.

    2. Make sure that there are no living beings (animals, plants, people) before operating the equipment.

    3. Connect to the mains and switch on the equipment. Then use the wheel to set the time you want it to operate for.

    4. Leave the room until the team finishes the treatment.

    5. After treatment, ventilate the room.

    Spare parts

    Not required.