Ozone Cannon

DESCRIPTION

Indicated for possible shock treatments, eliminating bad odors. It is the best system to prolong the life of fresh food on commercial surfaces and to definitively eradicate the problem of bad odors, including odors such as tobacco. Coverage area of up to 2500m2.


It is obtained by causing an electric shock and destroys bad odors through oxidation, thus leaving a fresh and pleasant environment.     


It is portable, which makes it ideal to carry in cleaning carts. With professional features to work under the most extreme conditions.

 

Data Sheet

Technical data

NET WEIGHT: 2800g. 

GROSS WEIGHT: 3000g 

DIMENSIONS: 24 x 17.5 x 19.5cm / 6. 88 x 9. 44 x 7. 67 inch. 

MATERIAL: AISI 304 stainless steel 

COLOR: Stainless steel. 

OZONE: 500mg/hour. 

AIR FLOW: 175m3/hour 

VOLTAGE: 110 V - 220 V -50/60 Hz 

CONSUMPTION: 0.53 Amp 

ELECTRICAL CURRENT: 6.6A - 2.9A

Installation

1. Place the appliance in such a way that it is at an optimal height to carry out its function. Do not place the device near water points or bottled liquids, respect a minimum distance of 3 m. 


2. Before putting it into operation, check that the appliance is not wet or damp on the internal parts and near the any electrical component. Remove all metal parts resting on the appliance. 


3. Do not install it in places where temperatures are -5º C and +50º C, check that the humidity is not higher than 85%.

1. Close windows and doors in the room to be treated. 


2. Make sure there are no living beings (animals, plants, people) before operating the equipment. 


3. Connect to the power and turn on the device. Then use the wheel to mark the time in which you want it to act. 


4. Leave the room until the team finishes the treatment. 


5. Once the treatment is finished, ventilate the room.

Products

Does not require.

Share by: